|
|
Solution technology multiple groove guide pulley to circular saw.
Koryčan, Jiří ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The project developed within the bachelor's degree by the pulley multiple groove design of the technology for desktop performance circular saws. The design work is finished the production of components for the piece and batch production, the choice of the intermediate processing and description of manufacturing operations, including tools used for the single and series production, production design work for production and evaluation of the proposed variants of the production. This thesis has been developed on the basis of the theoretical knowledge gained while studying at the Faculty of Mechanical Engineering in Brno and personal experiences.
|
|
|
Design and evaluation of gyroscope production
Horáček, Kryštof ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis deals with a desing of a gyroscope and with an evaluation of its manufacturing process. Based on created three-dimentional model the entire design of the gyroscope is introduced including its complete drawing documentation. The concept of the device production is executed in a piecewise matter, where a frame design of the production is made for each individual part of the gyroscope. Theoretical and practical acpects of individual production processes are thoroughtly disscussed including the production cost calculations considering the manufacturing background of small to medium sized workshops.
|
|
|
Design for Production of Clamping System
Tuza, Marek ; Zemčík, Oskar (referee) ; Sedlák, Josef (advisor)
This bachelor thesis deals with the development of a universal clamping system, which should be part of every home workshop. However, it is primarily intended for drilling operations. The theoretical part presents research on various types of clamping devices. This knowledge is later used in the practical part. The aim of this thesis was to create a design of the clamping system, to perform its complete production and to evaluate its features both from a technical and economic point of view. The output of this bachelor thesis is an entire universal clamping system and its detailed drawing documentation. Moreover, there are also suggested further developments and improvements. Even though the production of the clamping system itself appears to be economically disadvantageous in comparison with a commonly available clamping device, it is necessary in order to meet specific requirements. In conclusion, the overall evaluation of the production of the clamping system is given.
|
|
|
Living on the outskirts of the city
Sedláčková, Jana ; Malečková, Kateřina (referee) ; Dulenčín, Juraj (advisor) ; Brzoň, Roman (advisor)
The goal of the bachelor's thesis is to design housing that will meet the requirements of modern urban housing and will draw the benefits of suburban housing in the outskirts at the same time. The design was based on the author's previous work in the architectural design studio, which focused mainly on the analytical and design part, with the conclusion of an architectural study. The subject of this bachelor thesis is the creation of design documentation of Housing in the outskirts of the city. The documentation for a building permission and the documentation for production design were simplified for the purposes of the bachelor's thesis. The aim of the work is to create a proposal and prove its feasibility in accordance with Czech laws and standards. The proposal shows the possibility of contemporary living, which uses the advantages of community living (common areas such as garage, cellar, utility room; lower energy consumption) and also excels in the possibilities of individual living, which is characterized by a separate entrance and a separate garden or terrace. The design combines both types of housing, which are typically named buildings such as apartment building and family house. However, the proposal goes beyond these titles and seeks its definition in words such as villahouse.
|
|
|
Living on the outskirts of the city
Sedláčková, Jana ; Malečková, Kateřina (referee) ; Dulenčín, Juraj (advisor) ; Brzoň, Roman (advisor)
The goal of the bachelor's thesis is to design housing that will meet the requirements of modern urban housing and will draw the benefits of suburban housing in the outskirts at the same time. The design was based on the author's previous work in the architectural design studio, which focused mainly on the analytical and design part, with the conclusion of an architectural study. The subject of this bachelor thesis is the creation of design documentation of Housing in the outskirts of the city. The documentation for a building permission and the documentation for production design were simplified for the purposes of the bachelor's thesis. The aim of the work is to create a proposal and prove its feasibility in accordance with Czech laws and standards. The proposal shows the possibility of contemporary living, which uses the advantages of community living (common areas such as garage, cellar, utility room; lower energy consumption) and also excels in the possibilities of individual living, which is characterized by a separate entrance and a separate garden or terrace. The design combines both types of housing, which are typically named buildings such as apartment building and family house. However, the proposal goes beyond these titles and seeks its definition in words such as villahouse.
|
|
|
Design for Production of Clamping System
Tuza, Marek ; Zemčík, Oskar (referee) ; Sedlák, Josef (advisor)
This bachelor thesis deals with the development of a universal clamping system, which should be part of every home workshop. However, it is primarily intended for drilling operations. The theoretical part presents research on various types of clamping devices. This knowledge is later used in the practical part. The aim of this thesis was to create a design of the clamping system, to perform its complete production and to evaluate its features both from a technical and economic point of view. The output of this bachelor thesis is an entire universal clamping system and its detailed drawing documentation. Moreover, there are also suggested further developments and improvements. Even though the production of the clamping system itself appears to be economically disadvantageous in comparison with a commonly available clamping device, it is necessary in order to meet specific requirements. In conclusion, the overall evaluation of the production of the clamping system is given.
|
|
|
Design and evaluation of gyroscope production
Horáček, Kryštof ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis deals with a desing of a gyroscope and with an evaluation of its manufacturing process. Based on created three-dimentional model the entire design of the gyroscope is introduced including its complete drawing documentation. The concept of the device production is executed in a piecewise matter, where a frame design of the production is made for each individual part of the gyroscope. Theoretical and practical acpects of individual production processes are thoroughtly disscussed including the production cost calculations considering the manufacturing background of small to medium sized workshops.
|
|
|
Solution technology multiple groove guide pulley to circular saw.
Koryčan, Jiří ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The project developed within the bachelor's degree by the pulley multiple groove design of the technology for desktop performance circular saws. The design work is finished the production of components for the piece and batch production, the choice of the intermediate processing and description of manufacturing operations, including tools used for the single and series production, production design work for production and evaluation of the proposed variants of the production. This thesis has been developed on the basis of the theoretical knowledge gained while studying at the Faculty of Mechanical Engineering in Brno and personal experiences.
|
guest ::
